© 2018  IN-Power Co., Ltd All Rights    京ICP备05050896号-1   Powered By 300.cn

Drawer type active filter

Page view
编号:
分类
Power quality
Introduction
Drawer type active filter
时间
2018/07/30 16:06
I want to inquire price
Product description
Technical parameters

Drawer type active filter

 

 

Overview

 

Drawer type active filter - the active power filter unit with IGBT (Insulated Gate Bipolar Transistor) switch as the core, detects system current in real time, separates the harmonic current successively based on digital fast Fourier transform technique, generates control signals according to the set compensation percentage to drive the IGBT to generate compensation currents of equal magnitude and opposite phase, which offset each other with harmonic components of system current to achieve harmonic filtration effect.

 

 

Technical parameters

 

Rated voltage

Line voltage: 0.38kV±20%; Phase voltage: 0.23kV±20%

frequency

50Hz±5%or60 Hz ±5%

Rated current

30A, 45A, 50A, 60A, 75A, 80A

Overload capacity

120% rated compensation current/60s

Response time

≤5ms

Loss

≤2.5% am)

Compensation rate

≥97%

Total Harmonic Current Distortion

THDi ≤ 3% (full load)

Noise

≤60dB

Switching frequency

20kHz

Function set

Combination of harmonic compensation, reactive compensation, unbalance compensation and free compensation with priority

Cooling method

Air cooling

CT position

Free selection on load side or power side

Communication

RS485, LAN, Modubus protocol support

 

 

Product’s terminal block diagram

 

抽屉式有源滤波器产 抽屉式有源滤波器产

(Plug-in terminal type)

(Pluggable terminal type)

 

Product advantages

 Advanced control architecture and powerful arithmetic capability

The multi-core digital control architecture of DSP+FPGA+ARM is used to make full use of the hardware parallel processing advantage of FPGA and DSP digital signal processing capability, which greatly improves the computational processing capability and response speed of the control system.

 Modular design for easy installation

Modular design is used, with compact structure, the unique cooling channel of good heat dissipation effect and simple wiring, which greatly saves assembly time and space.

 Flexible wiring mode

Be provided with phase sequence self-adaption, and there’s no need to distinguish the phase sequence of A/B/C phase, which simplifies the installation procedure; The system current transformer can be located on the system side or on the power side, which reduces the difficulty of reconstruction.

 Three-level technology

The hardware configuration is more reasonable with the use of three-level topology, which greatly reduces the volume and loss of drawer type active filter and conforms to the development direction of energy saving of power grid

 Paralleling of multiple operation modes

Be provided with three operation modes of unbalanced current compensation, harmonic filtration and reactive compensation, and these three operation modes can be freely combined according to priority setting.

 

 

Product size

 

抽屉式有源滤波器产

 

Capacity (kvar.)

30A 45A 45A 50A 60A 75A 80A

W(mm)

500 500 500 500 500 500 500

H(mm)

190 190 190 190 190 190 190

D(mm)

550 550 550 550 550 550 550